There’s a lot of confusion around the topic of down insulation. Here we attempt to offer some clarification.
An average outdoor store will have a significant number of down products: sleeping bags, jackets and vests, even down booties for cold-weather hut trips. But – you can’t see any of it: the down itself is packed away out of sight inside the (hopefully downproof) fabric of the product.
Mysterious numbers are embroidered on that fabric, and terms like ‘hydrophobic’ and ‘RDS’ abound. So – what do all those confusing terms mean? Well, we’ve broken them down for you in this blog post. And what about all those numbers? As always, Sea to Summit goes out of its way to provide you, the consumer, with accurate specifications and independent verification when possible:
- A hangtag attached to each sleeping bag details fill weight (so you know how much down is in the sleeping bag), describes fabrics and specifies dimensions (to take the guesswork out of ‘will it fit?’)
- A detailed report from the International Down & Feather Laboratory (IDFL) is supplied with every Sea to Summit bag certifying the fill power and composition of the down. This is like suddenly discovering that you have X-Ray vision: you can see exactly what you’re paying for inside the colorful shell.
- All Sea to Summit sleeping bags use down that is RDS-compliant (Responsible Down Standard). See the paragraph under ‘Responsible Down Standard’.
Definition & Quality
Down is the natural insulation of waterfowl, comprised of clusters and down feathers. Thousands of tiny fibers radiate from the core of the cluster; this traps air and thus heat.
No other material comes close to the insulation value, longevity and “breathability” of quality (mature) down.
Mature down comes from older birds – the greater cost of raising birds over a longer lifespan means that mature down is more expensive. It has several advantages: the larger, denser clusters trap more air, and are more resilient to compression than smaller and more fragile immature clusters. Mature clusters have barbs on their filaments which catch (or ‘cling’) to other clusters to make a more even insulating mass. Immature down is much more likely to ‘clump’ and leave gaps in the down chamber which do not insulate. The maturity of the down is more important than the species (goose or duck) it comes from. The image below shows down clusters on the left and a down feather on the right.
Down Cluster to Feather Ratio
The ratio of clusters to down feathers is expressed as a percentage (i.e., 80/20 or 90/10). Broadly speaking, the higher the percentage of clusters, the greater the loft.
The more air trapped by the down, the better the insulation. Loft is expressed as Fill Power. Essentially, a one ounce sample of down is compressed and then allowed to expand in a special cylinder. The total volume it expands to (measured in cubic inches) is described as its fill power (1 oz of 750 Fill-Power down would therefore fill at least 750 cubic inches). However, a higher fill power number does not necessarily mean a warmer sleeping bag or jacket – you can achieve the same warmth with a lower fill-power down, but it would require a higher fill-weight to do so.
A number of hydrophobic/water repellent treatments are available for down. Sea to Summit sleeping bags use Ultra-Dry Down™, an extremely effective, durable, PFC-free, Bluesign® certified treatment. It retains 60% more loft, absorbs 30% less moisture & dries 60% faster than untreated down.
Responsible Down Sourcing
All Sea to Summit down sleeping bags are filled with RDS-certified down. The Responsible Down Standard (RDS) ensures humane treatment of ducks and geese used in down production. Audits are conducted at every step of the chain from sourcing to finished item to guarantee animal welfare and correct labeling of products.
As mentioned above, it’s impossible for the end-user to see the quality of the down inside a sleeping bag or jacket, because very few people possess X-Ray vision. For those of us without the ability to see through fabrics, a detailed analysis of the composition and fill power of the down used in each Sea to Summit sleeping bag is provided by the International Down and Feather Laboratory. No other company provides this certification to end-users.
Hopefully, the above will take the mystery out of some of those terms surrounding down products (and make clear the effort which Sea to Summit goes to provide clarity to the end user).
If you have questions relating to down, feel free to contact us via the blog.